Please register and login in order to share patches.

Quirked Pad OS by OscillatorSynk

Oscillator 1 timbre

Both sawtooth and square oscillators are enabled.

Pulse width of square oscillator is set to 59% (50% is perfectly square, 100% is very short pulsewave) and is modulated by LFO 2.

LFO 2 direct modulation amount for pulse width of square oscillator is 47.

Oscillator 2 timbre

Volume level for oscillator 2 is manually set to 69.

Tone for oscillator 2 is manually set to 87.

Volume (VCA) volume

Amplification level is set to 6dB (255) and is modulated by VCA Env.

VCA Env direct modulation amount for amplification level is 255.

Pan spread is set to 22 and is modulated by Mod Wheel.

Mod Wheel mod-matrix 4 modulation amount for pan spread is 10.

Oscillators ranges timbre

Oscillators 1 range is 8'.

Oscillators 2 range is 4'.

Noise timbre

Noise level is set to 101 and is modulated by Note Num.

Note Num mod-matrix 8 modulation amount for Noise level is -51.

OSC 1→2 sync timbre

to be completed

Oscillator 2 is syncronized to oscillator 1. This generates rich harmonic content when changing oscillator's relative piches.

High-pass filter (HPF) timbre

High-pass filter cut-off frequency is manually set to 111.21Hz (95).

Low-pass filter (VCF) timbre

Low-pass filter cut-off frequency is set to 647.48Hz (109) and is modulated by Note Vel, LFO 2, VCF Env.

LFO 2 direct modulation amount for low-pass filter cut-off frequency is 71.

VCF Env direct modulation amount for low-pass filter cut-off frequency is 47.

Low-pass filter envelope amount is modulated by Note Vel, Note Num.

Note Vel direct modulation amount for low-pass filter envelope amount is 144.

Note Num direct modulation amount for low-pass filter envelope amount is 92.

Filter resonance is set to 23 and is modulated by Mod Wheel.

Mod Wheel mod-matrix 3 modulation amount for filter resonance is 20.

Oscillator drift & unison detuning timbre

Unison detune level is off.

Oscillators drift level is manually set to 20. Drift rate is 0

Oscillator 1 pitch pitch

Oscillator 1 pitch is modulated by Note Num, LFO 1.

LFO 1 direct modulation amount for oscillator 1 pitch is 4.

Oscillator 2 pitch pitch

Oscillator 2 pitch is set to 1 semitones and is modulated by LFO 2.

LFO 2 direct modulation amount for oscillator 2 pitch is 134.

Tuning pitch

Patch Quirked Pad OS is transposed by 12 semitones.

FX routing & levels fx

FX mode is set to Send, and routing is

Effect 1 level is off. Effect 2 level is off. Effect 3 level is off. Effect 4 level is manually set to 23.

Mod, Delay & Reverb fx

not yet complete

Mod Wheel modulator

Controls VCF Resonance, Pan Spread, Mod Matrix Routing 5 Depth, VCA Pan.

function	type	destination	amount
timbre	matrix	VCF Resonance	20
volume	matrix	Pan Spread	10
	matrix	Mod Matrix Routing 5 Depth	63
volume	cross-mod	VCA Pan	128*191

Note Num modulator

Controls VCF Keyboard Tracking, LFO 1 Slew Rate, OSC 1 Pitch, Noise Level.

function	type	destination	amount
timbre	fader	VCF Keyboard Tracking	92
	matrix	LFO 1 Slew Rate	24
pitch	fader-indirect	OSC 1 Pitch	4
timbre	matrix	Noise Level	-51

Note Vel modulator

Controls VCF Cut-off Frequency, VCF Envelope Velocity Sensitivity, VCA Envelope Velocity Sensitivity.

function	type	destination	amount
timbre	fader-indirect	VCF Cut-off Frequency	47
	menu	VCF Envelope Velocity Sensitivity	144
	menu	VCA Envelope Velocity Sensitivity	62

LFO 1 modulator

Controls OSC 1 Pitch.

function	type	destination	amount
pitch	fader	OSC 1 Pitch	4

name	value
LFO 1 Rate	1.76Hz (130)
LFO 1 Delay / Fade	0s (0)
LFO 1 Shape	Square
LFO 1 Key Sync	off
LFO 1 Arp Sync	off
LFO 1 Mono Mode	0
LFO 1 Slew Rate	9

LFO 2 modulator

Controls OSC 1 Pulse Width Modulation Depth, OSC 2 Pitch, VCF Cut-off Frequency, VCA Pan.

function	type	destination	amount
timbre	fader	OSC 1 Pulse Width Modulation Depth	47
pitch	fader	OSC 2 Pitch	134
timbre	fader	VCF Cut-off Frequency	71
volume	matrix	VCA Pan	0

name	value
LFO 2 Rate	0.09Hz (29)
LFO 2 Delay / Fade	0s (0)
LFO 2 Shape	Triangle
LFO 2 Key Sync	off
LFO 2 Arp Sync	off
LFO 2 Mono Mode	0
LFO 2 Slew Rate	0

VCA Env modulator

Controls VCA Gain for All Voices.

function	type	destination	amount
volume	menu	VCA Gain for All Voices	255

name	value
VCA Envelope Attack Time	0.15s (25)
VCA Envelope Decay Time	1.13s (128)
VCA Envelope Sustain Level	100% (255)
VCA Envelope Release Time	12.43s (200)
VCA Envelope Trigger Mode	Key (0)
VCA Envelope Attack Curve	128
VCA Envelope Decay Curve	0
VCA Envelope Sustain Curve	128
VCA Envelope Attack Curve	0

VCF Env modulator

Controls VCF Cut-off Frequency.

function	type	destination	amount
timbre	fader	VCF Cut-off Frequency	47

name	value
VCF Envelope Attack Time	0.2s (34)
VCF Envelope Decay Time	7.09s (185)
VCF Envelope Sustain Level	28% (71)
VCF Envelope Release Time	10.29s (194)
VCF Envelope Trigger Mode	Key (0)
VCF Envelope Attack Curve	0
VCF Envelope Decay Curve	52
VCF Envelope Sustain Curve	128
VCF Envelope Attack Curve	0